Trains have strong romantic appeal, but from a functional perspective, they are hopelessly unable of meeting the needs of a modern sprawling city and its residents’ demand for point-to-point flexibility.

That’s starting to sink in, after decades of local planners and wonks hoping for a commuter train system. A story in today’s Idaho Statesman quotes national experts who spoke in Boise, saying a train system faces enormous obstacles here because of track quality, too many crossings, insufficient right-of-way and high cost. However, the experts (at least in the story) didn’t discuss the inherent shortcomings of rail as a transportation technology and how we have done an exceptionally poor job of requiring rail-friendly land use.

The only reason rail technology evolved is because the first machines that could convert matter into motion (steam engines) weighed tens of thousands of pounds. There were no roads to accommodate steam engines, but rails could be built to sustain the massive weight and allow them to move people and goods faster than they had ever moved before. To make up for the lack of point-to-point flexibility, people had to unload the trains and put themselves and goods on smaller, light-rail trains or electric trolleys.

Urban theorists like Kevin Lynch hold the dominant transportation technology determines the built form of a city: ancient cities relied on humans and animals, port cities relied on ships, Industrial Revolution cities relied on the rail and modern cities rely on the automobile. Not surprisingly, entire cities and small towns were designed around the limitations of the train. For a hundred years and more, the system worked.

By the time the automobile began to eclipse the train some 80 years ago, trains had nearly a century of capital and investment behind them, so they remain common to this day. Trains still work well for some things, like moving large volumes of heavy cargo, where train cars can be lifted and moved onto ships and intermodal inconvenience is kept to a minimum.

But trains are hopelessly outmoded in a modern city. True, a rail car would be able to zip quickly past Interstate 84 traffic jams, but could it take people to where they needed to go (downtown, Micron, West Boise office parks, etc.)? People being dropped off near the Boise Towne Square mall, for example, would be left at what is agruably the most pedestrian-hostile environment in Idaho. If only something could take them a little closer to their office park, the system would be much more useful!

For their part, Idaho cities have done virtually nothing to require the kind of urban design necessary for trains: buildings that come to the street, residential and commercial sharing the same property and a nice public realm – you know, the built form of classic Main Street America.

It’s not a question of population. Around a century ago, a commuter rail system operated profitably, albeit briefly, in the Boise Valley, when our population was much smaller. It’s a question of the built form of the city. With the exception of the original downtowns and neighborhoods, Treasure Valley cities are built to automotive scale, with large parking lots, huge streets and a serious lack of sidewalks.

The humble bus, however, bridges these needs nicely. In fact, with a little imagination, we could combine the advantages of trains (route priority) with the advantages of rubber-wheeled vehicles (flexibility). The concept is the Curb Guided Busway, used to good advantage in Adelaide, Australia and Nagoya, Japan:

..the O-Bahn runs on specially-built track, combining elements of both bus and rail systems … Interchanges allow buses to enter and exit the busway and to continue on suburban routes, avoiding the need for passengers to change. Buses travel at a maximum speed of 100 km/h (62 mph), and the busway is capable of carrying 18,000 passengers an hour from the City of Adelaide

The busway is a low concrete trough and the busses are fitted with “guide wheels”

The guide-wheel, which protrudes from the front sides and aligns with the track, is the most important part of the bus when travelling on the O-Bahn. Connected directly to the steering mechanism, it ‘steers’ the bus while on the track and prevents the main tyres from rubbing against the sides of the track.

So, a busway system wouldn’t require an expensive refurbishment of rails or highly specialized vehicles. We could also take advantage of our existing rail rights-of-way, so when a bus crosses over an arterial street, the crossing arms could swing down, allowing the bus to pass, just as they already do with a train. Or, the bus could leave the busway and move about on city streets, something a train could never do. As an added benefit, emergency vehicles could use the busway system.

This still wouldn’t be cheap. We’d have to pave the rail corridors, design new interchanges and educate drivers on a new transportation mode. However, given the obstacles to developing rail and the limited return we’d get for it, a Curb Guided Busway seems like the best bet.

Advertisements